MAC-48-ADDRESS is a fixed-width Value that holds a 48-bit IEEE 802 MAC address. It is Value VALUE-ISSUER-2WORD (0x09DL), Issuer 0x0000000D IEEE, codec number 0x0000C000, family BINARY. The Payload is exactly 3 WORD (6 octets, 48 bits).
Layout
TAG WORD 0x09D7 (0000 1001 1101 0111) 8 WORD in total
Issuer 2 WORD 0x0000000D (IEEE)
Codec number 2 WORD 0x0000C000
Payload 3 WORD octet 0 → 1 │ octet 2 → 3 │ octet 4 → 5
Interpretation and validity
- The six octets of the 48-bit MAC address are kept in the octet order of the notation string and of LAN transmission. Octets 0–1, 2–3, and 4–5 are each grouped into a WORD, from the upper octet to the lower octet.
- On IEEE 802 media the least-significant bit of each octet is transmitted first, but for that reason the bits within an octet are not reversed. I/G and U/L remain in the least-significant bit of octet 0 and the bit next to it.
- I/G=0 is an individual address, used as unicast at a destination, and I/G=1 is a group address, used as multicast or broadcast. U/L=0 is a universally administered address and U/L=1 is a locally administered address.
- No pattern is structurally excluded because of the I/G or U/L value. Universally/locally administered and individual/group addresses can all be represented, and locally administered, randomized, spoofed, and virtual MAC addresses can also be represented as 48-bit values.
- This value preserves only the 48 bits of an observed or presented address. It does not guarantee the permanent address of a particular device, global uniqueness, device or user authentication, ownership, or a persistent binding to the same device.
- This format handles only IEEE 802 MAC addresses of exactly 48 bits. It does not hold EUI-64 or other 64-bit MAC addresses. The IEEE RA describes the historical term
MAC-48as obsolete, but not every 48-bit MAC address can be called an EUI-48, so this format is not automatically equated with EUI-48. - If the Payload is not exactly 3 WORD, it is rejected.
Standards basis
- The IEEE Registration Authority’s Standard Group MAC Addresses writes a 48-bit LAN MAC address as six octets in transmission order, and explains that each octet is transmitted starting from its least-significant bit and that I/G and U/L are the two least-significant bits of the first octet. This format preserves the octets and bit positions as is.
- The IEEE Registration Authority’s Guidelines for Use of EUI, OUI, and CID defines I/G=0/1 as individual/group and U/L=0/1 as universal/local administration, and explains that local addresses are not globally unique. It also explains the historical terminology relation and the difference between
MAC-48and EUI-48. - IEEE SA — MAC Addresses explains that EUI-48 and EUI-64 can be used as MAC addresses and the like. This does not mean that an EUI-64 is put into this 48-bit record.
- RFC 9724 — State of Affairs for Randomized and Changing MAC Addresses and RFC 9797 — Randomized and Changing MAC Addresses record that real devices can randomly generate and change locally administered MAC addresses. Therefore a permanent device identity is not inferred from the MAC value alone.
- The GEUL TAG, the Issuer assignment, the direct Length, and the 16-bit WORD framing are not part of IEEE 802 or the sources above but rules added by this format.
Length
- The total is exactly 8 WORD: TAG 1 WORD, Issuer 2 WORD, codec number 2 WORD, and Payload 3 WORD, and it uses the direct length
LLLL=0111. There is no Length extension TAG, no descriptor, and no padding. - If the Payload is not exactly 3 WORD, it is rejected.
Example
A locally administered individual (unicast) address 02:00:5e:10:00:00 (I/G=0 and U/L=1 of the first octet 0x02):
09D7 0000 000D 0000 C000 0200 5E10 0000