GPS-TIMESTAMP-SECONDS is a signed second count from the GPS epoch 1980-01-06T00:00:00 GPS. It is not divided by GPS week number or truncated to the week rollover width of the broadcast field.
This cumulative count representation is not the IS-GPS-200 broadcast wire format but a GEUL-specific profile that maps the GPS time scale onto a fixed-width signed int64.
Layout
- Code: Value
VALUE-ISSUER-2WORD(0x09DL), Issuer0x00000016GPS, codec number0x00004000. Family TIME.
TAG WORD 0x09D8 (0000 1001 1101 1000) 9 WORD in total
Issuer 2 WORD 0x00000016 (GPS)
Codec number 2 WORD 0x00004000
Payload WORD 1st (bits 63..48) Signed Seconds high 16bit
Payload WORD 2nd (bits 47..32) Signed Seconds
Payload WORD 3rd (bits 31..16) Signed Seconds
Payload WORD 4th (bits 15..0) Signed Seconds low 16bit
Interpretation and validity
- All 4 Payload WORD are read as a 64-bit two’s complement signed count in big-endian WORD order.
- The valid range is
-2^63to2^63-1seconds. A negative value is a GPS-time instant before the GPS epoch. - The count is a continuous value running from the epoch. No truncation or rollover of the broadcast week-number field is applied.
- Small values always use 4 WORD as well. No UTC conversion parameters are carried.
Length
- The total is exactly 9 WORD: TAG 1 WORD, Issuer 2 WORD, codec number 2 WORD, and Payload 4 WORD, and it uses the direct length
LLLL=1000. There is no Length extension TAG, no descriptor, and no padding. - If the Payload is not exactly 4 WORD, it is rejected.
Example
- The GPS epoch is the Payload
0000 0000 0000 0000, 9 WORD in total,LLLL=1000. - 1 second after the epoch is the Payload
0000 0000 0000 0001. - 1 second before the epoch is the Payload
FFFF FFFF FFFF FFFF.
Standards basis and formal status
- GPS.gov Technical Documentation is the official distribution point of the GPS interface specifications.
- IS-GPS-200N specifies that GPS time is a continuous time scale and that week 0 begins at midnight on 1980-01-06, and it defines the GPS week number and the time-of-week/Z-count broadcast fields.
- IS-GPS-200 does not define a signed int64 wire representation of a cumulative count from the current epoch. The continuous count without rollover, the signed int64, and the GEUL big-endian WORD placement are a GEUL-specific mapping.