TAI-TIMESTAMP-SECONDS is a signed SI-second count from 1970-01-01T00:00:00 TAI. This cumulative count representation is not a BIPM standard wire format but a GEUL-specific profile that maps the TAI time scale onto a fixed-width signed int64.
Layout
- Code: Value
VALUE-ISSUER-2WORD(0x09DL), Issuer0x00000013BIPM, codec number0x00004000. Family TIME.
TAG WORD 0x09D8 (0000 1001 1101 1000) 9 WORD in total
Issuer 2 WORD 0x00000013 (BIPM)
Codec number 2 WORD 0x00004000
Payload WORD 1st (bits 63..48) Signed SI Seconds high 16bit
Payload WORD 2nd (bits 47..32) Signed SI Seconds
Payload WORD 3rd (bits 31..16) Signed SI Seconds
Payload WORD 4th (bits 15..0) Signed SI Seconds low 16bit
Interpretation and validity
- All 4 Payload WORD are read as a 64-bit two’s complement signed count in big-endian WORD order.
- The valid range is
-2^63to2^63-1seconds. A negative value is a TAI instant before the epoch defined by GEUL. - Small values always use 4 WORD as well. No UTC offset or leap-second table is stored.
Length
- The total is exactly 9 WORD: TAG 1 WORD, Issuer 2 WORD, codec number 2 WORD, and Payload 4 WORD, and it uses the direct length
LLLL=1000. There is no Length extension TAG, no descriptor, and no padding. - If the Payload is not exactly 4 WORD, it is rejected.
Example
- The GEUL TAI epoch is the Payload
0000 0000 0000 0000, 9 WORD in total,LLLL=1000. - 1 second after the epoch is the Payload
0000 0000 0000 0001. - 1 second before the epoch is the Payload
FFFF FFFF FFFF FFFF.
Standards basis and formal status
- The BIPM SI Brochure, 9th edition specifies the SI second and the International Atomic Time (TAI) time scale.
- BIPM does not define a signed int64 cumulative count from the
1970-01-01 TAIepoch or its wire encoding. The epoch, the signed int64, and the GEUL big-endian WORD placement are a GEUL-specific mapping. - The fixed-width int64 was chosen for interchange consistency with other TIME count profiles, and it does not mean that a BIPM format is reproduced as is.